                             README.TXT


 NOTES ON LCS2000/LTS2000 RSS Release R02.00.04 RVN4156G
 =======================================================

 The LCS2000/LTS2000 Radio Service Software is being updated to R02.00.04.

 The LCS2000/LTS2000 RSS has been issued to support for new features (FTR only)
 and fix some issues.

 The new features are:

  Add a tuning screen for temperature compensation.
  Add a new screen for Get/Save tuning data.

 The fixed issues are:

  Limit the DTMF values (F4/F2/F8) to the valid range.
  Fix the reset dynamic block operation (F4/F6/F8/F7/F6/F8) for 900MHz Full Smar
tZone.
  Fix a problem with the blank value of the announcement TG field (F4/F6).

 DISK CONTENTS:
 =============

 The LCS2000/LTS2000 RSS, version R02.00.04, comes in one 3.5" Double
 Sided/Double Density disk.  The disk contain the following files:

        DISK #1
        -------
        DISK.ID
        INSTALL.DAT
        INSTALL.EXE
        LCS.LIB
        README.TXT


 INSTALLATION PROCEDURE:
 =======================

 1. Place Disk 1 in your floppy disk drive.
 2. Go to the floppy disk drive.
 3. Type "INSTALL" and press return.
 4. Follow the installation directions displayed on your screen.
 5. When installation is complete, make sure that you are in the
    directory where the LCS2000/LTS2000 RSS application was installed.
 6. Type "LCS" at the DOS prompt to start the LCS2000/LTS2000 RSS application.

 Please refer to the user manual for more information.

 If you have problems programming or using this product,
 contact your sales representative.

