                             README.TXT


 NOTES ON LCS2000/LTS2000 RSS Release R01.01.15 RVN4156B 
 =======================================================

 The LCS2000/LTS2000 Radio Service Software is being updated to R01.01.15.

 The LCS2000/LTS2000 RSS has been issued to support for new models and 
 features.

 The models are:

 M10RHD4DC5AN   - LCS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, UHF1 12.5 KHz.
 H10QDH4DC5_N   - LTS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, UHF1 12.5 KHz.
 M10RHD6DC5AN   - LCS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, UHF1 25 KHz.
 M10WGD4DC5AN   - LCS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, 900MHz.
 H10WCH4DC5AN   - LTS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, 900MHz.
 M10KHD4DC5AN   - LCS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, VHF1 12.5 KHz.
 M10KHD6DC5AN   - LCS2000, 10 Conventional Channel, 10 Systems,
                  8 Talkgroup, VHF1 25 KHz.

 DISK CONTENTS:
 =============
 
 The LCS2000/LTS2000 RSS, version R01.01.15, comes in one 3.5" Double 
 Sided/Double Density disk.  The disk contain the following files:

        DISK #1
        -------
        DISK.ID
        INSTALL.DAT
        INSTALL.EXE
        LCS.LIB
        README.TXT


 INSTALLATION PROCEDURE:
 =======================

 1. Place Disk 1 in your floppy disk drive. 
 2. Go to the floppy disk drive.
 3. Type "INSTALL" and press return.
 4. Follow the installation directions displayed on your screen.
 5. When installation is complete, make sure that you are in the 
    directory where the LCS2000/LTS2000 RSS application was installed. 
 6. Type "LCS" at the DOS prompt to start the LCS2000/LTS2000 RSS application.

 Please refer to the user manual for more information.
 
 If you have problems programming or using this product,
 contact your sales representative.
