================================================================
Professional Radio - Customer Programming Software R06.01.00
================================================================

Known CPS Issues:
----------------  

1) If your PC is running the first release of Microsoft Windows 95
   and Internet Explorer has not been installed, you may experience
   problems in installing and running the CPS due to certain
   components of the operating system being out of date.

   To eliminate this problem two Microsoft patches have been included
   on the CPS CD. If you experience any problems under Windows 95,
   please go to the CD and run:
     /Win95Patches/40comupd.exe
     /Win95Patches/dcom95.exe
   and then re-install the CPS. 
 
2) On some PCs, the CPS may abnormally terminate if Print Preview
   is attempted on the Print Custom screen. This problem only occurs
   when Print All is selected. This problem has been observed on 
   Compaq Windows 98 computers with the following programs running:
      * Easy Access Internet Program (cpqEasyAcc.exe)
      * Compaq Internet Watchdog Program (watchdog.exe)
   If this CPS function is to be used, it is recommended that these 
   programs be removed from the PC startup.  

3) When the tree view is printed some nodes may overlap on the
   printout and an extra blank page may be printed. This issue
   is more likely to occur on large codeplug configurations.   

4) On some printers, the columns in some printed tables might be
   slightly wider than they should be, causing the table to spread 
   horizontally onto a second page.

5) Emergency Revert Personalities assigned on the Signaling Configuration Page
   will not be tracked if the personality being referenced is moved in the tree
   view.

6) On certain HP Laserjet printers the Print Summary option will only print
   one page. If you experience this problem, it is recommended that you first
   save the information to a file and then use any Editor (Word, Wordpad, etc...)
   to open the file and print the summary information.


Major CPS Enhancements:
-----------------------

New functionality has been added to accommodate the following radio models:
EX500, EX600; GP346, GP386; PRO5150 Elite, PRO7150 Elite; GP328 Plus, GP338 Plus

Home Revert AutoKey
When enabled, this feature will allow the radio user to press a single button 
and have the radio revert to the specified Home Revert Zone/Channel and automatically 
key-up the radio.  This feature will provide the radio user with an Emergency-like 
feature, which will automatically key up and send PTT ID (if enabled) to all other 
radio users.  This feature was originally implemented for LS Trunking 
and has now been added to the Conventional mode for LS Trunking.

Revert Scan
When set, it will enable the normal scan implementation whereby, when scan exits, 
it returns to the last landed zone/channel. When cleared (disabled), it uses alternative 
revert scan, which causes the radio, when exiting scan, to return to the channel from 
where scan is entered. This is a mobile only feature. This functionality will be added 
to the Professional Series mobile radio in late 2001.

Frequency or FCC Channel Number Input
This feature will allow the user to enter either the FCC Channel number or 
Frequency when programming 800MHz LS Trunking radios. An additional Option has been 
added to enable or disable the feature. 

Extended 800MHz Frequency range for Latin America
This is an enhancement to increase the 800MHz Frequency range for 
Latin America. 


Reported Issues
------------------

1) Resolved the issue whereby selecting "Rx Only" in first Conventional Personality 
caused an unrecoverable invalid condition.


Programming Hints:
------------------

1) It should be noted that a new/added conventional personality 
   must be assigned to a zone/channel position. To add a zone to 
   a radio click the "+" in a Personality Assignment to Zone 
   Window. To add a conventional personality to the radio, click 
   the "+" on a Conventional Personality Window. To add an 
   additional conventional personality to a zone go to the 
   Personality Assignment to Zone:Channel window for the 
   desired zone.  Click the right mouse key within the channel 
   table to add a conventional personality entry. Please read 
   the CPS help for additional information. 

2) Speed Dial buttons should not be programmed to the P1, P2, and
   P3 buttons on radios, which overlay these buttons with the menu 
   navigation keys. The speed dial buttons will not operate 
   in this configuration because the buttons function as the menu
   navigation keys when phone mode is entered. 

3) When adding a new conventional personality, verify that the
   bandwidth selected on the Conventional Personality  Basic screen is 
   correct.  Incorrect selections will lead to poor radio 
   performance.  





