===========================================================

 SOFTWARE RELEASE NOTE

===========================================================

Product  : Professional GP300 Series FlashGrade Tool
KIT No   : ENVN4019P
Release  : R03.01.25
Date     : 26-Apr-2001
Language : English

===========================================================

 Purpose Of This Release

===========================================================

Supported features:

- Reading Radio information

- Upgrade a radio to software version R03.01.25 from
  previous released versions with hardware codeplug update, 
  saving of tuning data and converting of application codeplug
  to Phase 3 layout

- Rated volume tuning value is increased for all R01.00.xx 
  versions and for R02.00.xx version upgraded and not re-tuned
  before (only VHF, UHF1 and UHF2)

Supported Software versions:

- Only official radio software release version and bands.
  In this version:
  R01.00.04 .. R01.00.14, R01.00.17 .. R01.00.21, R02.00.18,
  R02.00.20, R02.00.23, R02.00.27, R02.01.03, R02.02.01, 
  R02.02.03, R02.00.04, R03.00.28 .. R03.00.30, R03.01.00,
  R03.01.02, R03.01.10, R03.01.17, R03.01.21, R03.01.22
  software is updated to version R03.01.25
  codeplug is updated for all versions

===========================================================

 How To Install And Run This Software

===========================================================

Installation of the software is not necessary. The software
can either be started directly on a floppy disk or on a hard
disk by calling the UpgradeTool.exe file. All files of this
release must be copied to the same directory.

For the usage of this software the following radio accessories
are required:

(A) - Flash adapter, P/N HLN9742
    and (i)
    - Radio Interface Box, P/N RLN4008
      with battery or power supply
    - RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
    - Programming/test cable, P/N RKN4074
    or  (ii)
    - RIBless programming cable, P/N RKN4075

    By using equipment (i) the Flash adapter has to be connected 
    beetween the Radio Interface Box and the Programming/test cable.
    Maximum baud rate for this equipment is 19,200 Bd.

    By using eqipment (ii) the Flash adapter has to be connected
    beetween the PC and the RIBless programming cable.

    For Flash Adapter HLN9742B, "Flash mode on" means switch 
    position "A", position "B" is not used for portable radios.

or

(B) - Vehicle Adapter EN1006, EN1007 or EN1008
    - Service cable ENLN4002

    "Flash Adapter Switch OFF" means ENLN4002 switch to "Radio 
    Service", "Flash Adapter Switch ON" means switch to "Radio
    Flash". Maximum baud rate for this equipment is 19,200 Bd.

    Removing the power supply or battery means for vehicle adapter:
    Switch radio off, take radio out of the vehicle adapter, remove
    and re-attach battery, insert radio into vehicle adapter again
    and then turn the radio on.

===========================================================

 Radio Software Release Note

===========================================================

PRODUCT : WARIS 5T GP320/GP340/GP360/GP380 Portable Radio Firmware

VERSION       : R03.01.25
DATE OF BUILD : 23-Apr-2001

Associated Part Numbers :

Description                                               Part No.
WARIS Portable PLAIN-MINUS / POPULAR / PREFERRED Radios   8266551A06

SUPERTANAPs Supported :-
 
 136-174MHz (VHF)
 ----------------
 PMUD1488A (GP340)    POPULAR VHF band
 PMUD1492A (GP320)    PLAIN-MINUS VHF band
 PMUD1489A (GP380)    PREFERRED with KEYPAD VHF band
 PMUD1490A (GP360)    PREFERRED without KEYPAD VHF band
                      
 403-470MHz (UHF)     
 ----------------     
 PMUE1440A (GP340)    POPULAR UHF band
 PMUE1443A (GP320)    PLAIN-MINUS UHF band
 PMUE1441A (GP380)    PREFERRED with KEYPAD UHF band
 PMUE1444A (GP360)    PREFERRED without KEYPAD UHF band 
                      
 450-527MHz (UHF2)    
 -----------------    
 PMUE1484A (GP340)    POPULAR UHF2 band   
 PMUE1485A (GP380)    PREFERRED with KEYPAD UHF2 band
                      
 29-42MHz (LB1)       
 -----------------    
 PMUB1015A (GP340)    POPULAR LB1 band
 PMUB1042A (GP380)    PREFERRED with KEYPAD LB1 band
                      
 35-50MHz (LB2)       
 -----------------    
 PMUB1028A (GP340)    POPULAR LB2 band
 PMUB1043A (GP380)    PREFERRED with KEYPAD LB2 band
                      
 300-350MHz (300)     
 -----------------    
 PMUD1546A (GP340)    POPULAR 300 band 


Affected Models :

PLAIN-MINUS, POPULAR, PREFERRED with KEYPAD and without
KEYPAD models using 512k Flash devices (AT49LV040T).

===========================================================

 Associated Software

===========================================================

CODEPLUG COMPATIBILITY : R03.00.22 (Radio Info Version R4.04)
CPS COMPATIBILITY      : R03.00.02

===========================================================

 New Features / Notes

===========================================================

- Problems Solved since previous Public Release (R03.01.22)

TAUse02009 - 5 tone timing selectable change

GCC7014402 - Radio with scan and priority channel has low
             volume setting which cannot be adjusted with the
             volume control.
            
GCC7021184 - Radio programmed with more than about 40 contact 
             list entries (depending on other programming)
             resets by making a call during scan if contact
             list entry number is greater than about 40 or not
             in the list at all. 